Boston Scientific Vercise DBS Instrucciones De Uso página 29

MRI Mode (For MR Conditional Rechargeable Vercise Gevia Stimulator Only)
Charge Stimulator Now Screen
The Stimulator battery must be fully charged before the MRI Mode is enabled. If the Stimulator battery
is not fully charged, the Remote Control will display one of the following messages instructing the
patient to charge the Stimulator before enabling MRI Mode.
Warning: Always check the Stimulator battery to ensure that it is fully charged before performing a
scan on the patient.
1. Press to dismiss the error message and return to the Remote Control Home Screen.
2. Instruct the patient to charge the Stimulator.
3. Enable MRI Mode once the Stimulator is fully charged.
Vercise™ DBS Remote Control 3 Directions for Use
91172931-02 REV A 25 of 835