No Program To Run Screen - Boston Scientific Vercise DBS Instrucciones De Uso

To retry communication with the Stimulator – this resends the last command – select Retry
cancel communication and return to the screen, press
The Telemetry Help tool is also available to assist you in improving communication between the
Remote Control and the Stimulator. To use the Telemetry Help tool, select Telemetry Help
following screen will be displayed:
The telemetry bars indicate the strength of wireless communication. The number of bars will change
depending on the distance and orientation of the Remote Control from the Stimulator. This tool will
continue to measure the strength of communication for 30 seconds or until

No Program to Run Screen

This screen is displayed when the Stimulator has no programs to run.
Telemetry Error
Communication
Failed
Retry
?
Telemetry Help
Cancel Select
Test the Remote
at Di erent
Positions
Press to Exit
P
No Program
to Run
Press to continue
?
.
is pressed.
P
0
Vercise™ DBS Remote Control 3 Directions for Use
91172931-02 REV A 31 of 835
Troubleshooting
. To
? . The