Second Level Menu - Cc (Cycle Counter) - entrematic Ditec ION4 Manual De Usario

Display
AR - Alarm reset
Resets all the alarms in the memory (counters and log).
NB: when the installation has been completed, you are advised to delete the alarms in
order to facilitate future checks.
IM - Motor current visualisation
TT - Display min / max temperatures recorded
- by pressing for 2 seconds the values are reset
- minimum value with active right point
TF - Limit switch test
Only FA / FC are displayed when the respective limit switches are configured and active.
If the limit switches are active but not configured:
- FA = N.O. (both active points)
- FC = NO (no active point)
UP - Firmware update
Activates the card bootloader in order to update the firmware.
15.7 Second level menu - CC (Cycles Counter)
Display
CV - Display of total operations counter
CP - Display of partial operations counter
CH - Display of power supply hour counter
BH - Visualisation of counter for power supply hours via battery
EN
→
2"
→
2"
→ → →
→ → →
→ →
→ →
Description
Description
182 manovre [esempio]
→
716 manovre [esempio]
→
215 ore di funzionamento
→ →
in batteria [esempio]
215 ore di funzionamento
→ →
in batteria [esempio]
34