Metal Pipe With Loose Flanges; Non-Metallic Pipes Or Pipes With Insulating Liner; Flowmeter Sensor In Stainless Steel Design Model Se21; Ground For Devices With Hard Rubber Lining - ABB FSM4000 Instrucciónes De Puesta En Marcha

Caudalímetro electromagnético
Ocultar thumbs Ver también para FSM4000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 135
Installation
3.7.3

Metal pipe with loose flanges

Fig. 17
3.7.4

Non-metallic pipes or pipes with insulating liner

Fig. 18
3.7.5

Flowmeter sensor in stainless steel design model SE21

Ground the stainless steel model as shown in the figure. The measuring fluid is grounded via
the adapter (1) and an additional ground is not required.
Fig. 19
3.7.6

Ground for devices with hard rubber lining

For devices with meter sizes DN 125 and larger, the liner contains a conductive element. This
element grounds the measuring agent.
3.7.7
Ground for devices with protective plates
The protective plates are used to protect the edges of the liner in the measuring tube, e.g., for
abrasive fluids. In addition, they function as a grounding plate.
For plastic or pipes with insulating lining, electrically connect the protective plate in the same
manner as a grounding plate.
3.7.8

Ground with conductive PTFE grounding plate

For devices with a meter size between DN 10 ... 150, grounding plates made of conductive
PTFE are available. These are installed similar to conventional grounding plates.
16 - EN
2
1
3
Flange design
1
2
3
Flange design
1
FSM4000
Wafer design
Wafer design
G00531
G00532
G00533
D184B141U03

Publicidad

Tabla de contenido
loading

Tabla de contenido