Husqvarna SMR 450-R 2009 Manual De Uso Y Mantenimiento página 114

BRAKE PADS REMOVAL
- Remove springs (1).
- Remove pins (2).
- Remove pads.
CAUTION!
Don't operate the brake lever or pedal
while removing the pads.
SMR-R
FRONT
2
44
PADS WEAR
a) In front: thickness "A" must never be lower than the one
pointed out by the wear control notches.
b) At the back: thickness "A" must never be lower than 3,8
mm.
If service limit is exceeded, always replace the pads in pairs.
1
2
1
FRONT
REAR
REAR