Husqvarna SMR 450-R 2009 Manual De Uso Y Mantenimiento página 78

FRAME
Type...............................Steel single tube cradle (roud, rectangular,
ellipsoidal tubes); light alloy rear frame
FRONT SUSPENSION
Type "Upside-Down MARZOCCHI" telescopic hydraulic front fork with advanced
axle (adjustable in compression and rebound stroke); stanchions tubes ø 1,97 in.
Legs axis stroke ................................................................. 10,63 in.
REAR SUSPENSION
progressive with hydraulic single shock absorber
Type....
Wheel stroke ......................................................................11,42 in.
WHEELS
With aluminium spokes and STS "Tubeless Alpina" device
FRONT BRAKE
Type ......................................... "BREMBO" floating disc Ø 12,2 in.,
with hydraulic control
wawe type, and radial caliper machined from
billet; "BREMBO" Racing type 16x16 machined from billet.
REAR BRAKE
floating disc
Type..... "BREMBO" Ø 9,45 in., "Wavw" type
draulic control and floating caliper
RIMS
Front ......................................."EXCEL" in light alloy
in light alloy
Rear ............................................"EXCEL"
TIRES
Front.................................."DUNLOP" KR 106 - slick TUBELESS (465) - 125/80R420
Rear....................................."DUNLOP" KR 108 - slick TUBELESS (950) - 170/55R17
Cold tire
pressure (front) ........................................................................ 20 p.s.i.
Cold tire
pressure (rear)....................................................................... 22,7 p.s.i.
ELECTRIC SYSTEM
Battery ...........................................................................12 V - 6 Ah
8
DIMENSION, WEIGHT, CAPACITY
Wheelbase .................................................................56.93 in.
Overall length ...............................................................81,18 in.
Overall width ...............................................................33,07 in.
Overall height
............................................................50,39 in.
"SACHS"
Saddle height
...................................................................37 in.
Minimum ground clearance
Dry weight
.....................................................................247 lb.
Fuel tank capacity
.................................................................................1,6 imp.gallons
.................................................................................1,9 u.s. gallons
Coolant capacity
with hy-
...............................................................0,97÷1,14 imp. quarts
.................................................................1,16÷1,37 u.s. quarts
: 3,50"x16,5"
Transmission oil
: 5,50"x17"
Oil and oil filter replacement
Oil replacement ..........................1,3 imp.quarts/1,6 u.s. quarts
...........................................11,02 in.
.......1,5 imp.quarts/1,8 u.s. quarts
TABLE FOR LUBRICATION, SUPPLIES
Engine, gearbox and primary drive lubricating oil
AGIP RACING 4T (10W-60)
Engine coolant
AGIP COOL
Brake system fluid
AGIP BRAKE 4 (DOT 4)
Clutch fluid
SAE 10 MINERAL OIL FOR HYDRAULIC SYSTEM
Grease lubrication
AGIP BIKE GREASE
Final drive chain lubrication
AGIP CHAIN LUBE
Front fork oil
AGIP FORK 7,5 (SAE 7,5) (for hard climatic conditions SAE 5)
Oil for rear shock absorber
AGIP FORK 2,5 (SAE 2,5)
Electric contact protection
AGIP CONTACT CLEANER
Fillers for radiator
AREXONS LIQUID STOPWATER