Engine Start - Husqvarna SMR 450-R 2009 Manual De Uso Y Mantenimiento

ENGINE START

Proceed as follows:
1) make sure the fuel tap (A) is in the Open position.
2) shift gear pedal (1) in neutral position;
3) pull the starter knob on the carburetor (BLACK knob 2 for
cold starting *, RED knob 3 for warm starting);
4) lower the starter pedal (4).
BEFORE MOVING OFF, DEACTIVATE THE KNOB
OF THE STARTER ON THE CARBURETTOR.
*: after a prolonged inactivity of the motorcycle or in presence
of a low external temperature.
3
2
A
1
N
4
16