Publicidad
SMONTAGGIO MOTORE
ENGINE DISASSEMBLY
DÉCOMPOSITION MOTEUR
MOTORAUSBAU
DESMONTAJE MOTOR
Remove the seeger ring (7) and withdraw the pinion, operating on the L.H.
crankcase.
If not previously removed, remove the R.H. oil screen (8) and the L.H. oil screen
(9): for this one, remove the cover (8 mm wrench).
Remove the oil vapour recovery duct (10) using a 19 mm wrench.
Remove the clutch control rod (11).
Pay attention to the filter (8) reassembling sense.
Part. N. 8000 A8466 (12-2006)
F.26
Publicidad
Capítulos
