7. Product introduction
7.1 Product description
9
Fig. 21 S pump, range 72
Pos.
Description
1
Inlet
2
Outlet
3
Power cables
4
Control cable
5
Lifting bracket
6
Terminal box
7
Submersible motor
8
Pump
9
Vent valve
7.2 Applications
Depending on the installation type, the pumps can be used for
submerged or dry, horizontal or vertical, installation.
Maximum solids size: 3.5 - 5.7 in (90-145 mm), depending on
impeller type.
Installation
Description
type
Sewage pump without cooling
S
jacket for submerged installation
on auto coupling.
Sewage pump with cooling
C
jacket for submerged installation
on auto coupling.
Sewage pump with cooling
D
jacket for dry vertical
installation.
Sewage pump with cooling
H
jacket for dry horizontal
installation.
Sewage pump without cooling
ST
jacket for installation in vertical
column pipe.
7.3 Pumped liquids
S pumps are designed for the pumping of sewage and
wastewater in a wide range of municipal and industrial
applications.
Accessories
Auto coupling
Auto coupling
Base stand for
vertical
installation
Base plate for
horizontal
installation
Seat ring
17