DO NOT USE YOUR BICYCLE IF IT DOES NOT PASS THIS TEST – CORRECT ANY FAULTS BEFORE USING THE BICYCLE BY VISITING A SPECIALIST
MECHANIC OR A PROFESSIONAL CAMPAGNOLO SHOP.
• Make sure that all of the bicycle components, including (but not exclusively) brakes, pedals, handgrips, handlebars, frame and seat unit are in perfect condition and ready
for use.
• Make sure that none of the bicycle components are bent, damaged or out of alignment.
• Check to ensure that all of the locking and fixing devices on the bicycle are properly adjusted. Bounce the bicycle on the ground to check whether you can see or hear any
loose parts.
• Check all reflectors are securely mounted and are clean.
• Make sure the wheels are perfectly centred. Spin the wheel to ensure that it does not wobble up and down or from side to side.
• Spin the wheel to check that it rotates freely and to ensure that the brake pads are not touching the disc when the brake levers are not depressed.
• Before using the bicycle, always check that the front and rear brakes are working correctly by testing the brake levers several times, ensuring that the front and rear disc
rotors engage correctly.
For any other questions or comments, please contact your nearest Campagnolo Pro-Shop. You can find a list of Campagnolo Pro Shops on the website: www.
campagnolo.com.
WARNING!
Only original discs, pads and oil that are supplied with the Campagnolo drivetrain or original replacement parts must be used; failure to respect the above
requirements could result in accidents, physical injuries or even death.
WARNING!
Do not use products to reduce the noise when braking - these products also reduce the braking power, and as such, can lead to accidents, physical injury or
even death.
6
4 - BEFORE USING THE BICYCLE