CAMPAGNOLO SUPER RECORD EPS Manual Del Usuario página 28

For each pad, check that the W pad wear indicator (Fig.10) is present, that the pad is properly positioned with the metal support Q (Fig. 10) in contact with the piston, and
that the R friction area of the pad (Fig.10) is in contact with the disc. If this is not the case, consult a qualified mechanic or a Campagnolo Pro Shop (as indicated in Chapter
2 - "INFORMATION AND TECHNICAL SUPPORT").
CAUTION
Use in wet, muddy, sandy or dusty conditions may drastically reduce the lifetime of the brake pads,
causing earlier wear than if they were used on clean asphalt roads. As such, it is important to check
very frequently that the W brake wear indicator (Fig. 10) is visible on the pads. If it is not visible, ask
your mechanic to replace the pads.
WARNING!
Failure to observe the above instructions could lead to a loss of control of the bicycle and cause
accidents, physical injury or even death.
WARNING!
Only use original Campagnolo pads - in addition to having different friction surfaces which can alter the effectiveness of braking, a pad made from a different
®
support material (for example, aluminium rather than steel) could result in increased transmission of heat to the calliper, causing the brake system to overheat
which in turn could lead to accidents, injury or death.
Caution
Using a different brand of brake pads instead of original Campagnolo brake pads automatically voids the product warranty.
®
Q
W
10
R
11 11