7.2 - TRANSPORTATION
• If you need to remove the wheels from the bike, ensure that you have
inserted the transport tool (Fig. 20/ 21) which prevents the brake pads from
coming together if the brake lever is accidentally engaged, making it impos-
sible to insert the disc.
If this occurs, consult a qualified mechanic or a Campagnolo Pro Shop to
have this issue rectified.
• The braking system can be transported by air; no adjustments need to
be made. Make sure that the brake system tubing is protected and cannot
become bent.
• After transportation:
- Check that there are no oil leaks.
- Check that no component of the bicycle is damaged, particularly the
cables and hoses that form part of the braking system.
- Engage the brake lever 4-5 tines in a safe place to ensure that the front and
rear brake systems are working properly.
• Do not expose the product to temperatures below -10 ° C (5 ° F) or above 60 ° C (131 ° F). For this reason, do not leave these components in locked cars parked in the sun
and do not store them near radiators or other heat sources. Do not store carbon or plastic products in direct sunlight.
For all information and requirements relating to the product, the instructions provided in the sections "3 - SAFETY RECOMMENDATIONS", "4 - BEFORE USING THE BICYCLE"
and "6 - PERIODIC INSPECTION" must be followed.
Campagnolo recommends that you take your bike to a Campagnolo Pro-Shop or mechanic specialised in assembling Campagnolo
that the brake system and all other parts of the bicycle are working correctly. However, depending on how the bicycle is used, more frequent inspections may be necessary.
Ask your mechanic to help you choose the best maintenance programme for you.
A mechanical expert may be better trained and qualified to check the function of the system than even the most experienced of users.
16
8 - PERIODIC MAINTENANCE AND SAFETY INSTRUCTIONS
Campagnolo S.r.l. reserves the right to change the content of this manual without notice.
The most up-to-date version will be available on www.campagnolo.com
20
21
components at least once a year, to check
®
Rev. 01 - 04/2020