Stihl MS 260 Manual De Instrucciones página 41

English / USA
o_
When engine begins to fire:
• Move Master Control lever (4) to }_,(
and continue cranking - as soon
as engine runs, immediately blip
the throttle trigger (5) -
the Master Control lever (4) wilt
move to the "Run" position i (6)
and the engine will settle down to
idling speed.
As the chain brake is still engaged,
the engine must be returned to
idling speed immediately - or the
engine and chain brake might
otherwise be damaged.
\\ \\ / /
©
• Pull the hand guard back toward
the front handle:_,_)
The chain brake is now disengaged
- your saw is ready for operation.
r_ Always disengage chain brake
before accelerating engine. High
revs with the chain brake engaged
(chain locked) wilt quickly damage
the powerhead and chain drive
(clutch, chain brake).
• Observe safety precautions.
• Always check operation of chain
lubrication before starting work.
At very low outside temperatures:
• Allow engine to warm up at part
throttle.
• Change over to winter operation
if necessary - see "Winter
Operation".
To shut down the engine:
• Move Master Control lever to 13
If fuel tank has been run until dry
and then refueled:
• Press in decompression valve.
• Pull starter rope several times until
fuel line is primed.
• Nowstart the engine.
40 MS 260