Stihl MS 260 Manual De Instrucciones página 59

Engfish / USA
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or _ #__
cutting conditions are difficult (very dusty work area, resin-rich wood, _ z _
co'o _ o_
tropical wood etc.), shorten the specified intervals accordingly. If you only o ._ _ = S __
use the saw occasionally, extend the intervals accordingly. _ _ _ _
Carburetor
Spark plug
All accessible screws and nuts
(not adjusting screws) 2)
Spark arresting screen* in muffler
Chain catcher
Cylinder
Check idle adjustment - chain must not rotate X
Readjust idle
Readjust electrode gap
Retighten
Inspect
Clean or replace
Check X
Replace
Decarbonizing
every 135 hours of operation
o
E E _
x
x
x
x
x
x
x
2) Firmly tighten cylinder base screws
of professional saws (3.4 kW or
more) after 10 to 20 hours of
operation
* see "Guide to Using this Manual"
58 MS 260