Technical Data - Hupfer SGR Manual Del Usuario

Section 3
Page 18
3.5

Technical data

SGR | SPV
Structure length
(min./max.)
Conveyor length
(min./max.)
Width
Total height
Weight
Number of legs
Belt width
Motor power
Protection class of motor
Speed range
Switch box /
Protection class
Switch box
Electrical connection
Types of sockets
Power consumption
(without sockets)
Operating and ambient
conditions
You can find the corresponding certification marks on our homepage at www.hupfer.de.
Belt Conveyor System
SGR | SPV
Value Dimension
118.1 - 472.4 in
(3000 - 12000) (mm)
100.4 - 454.7 in
(2550 - 11550) (mm)
19.7 (500) in (mm)
35.4 (900) in (mm)
approx. 44.1 lbs/ft (kg/m)
(approx. 20)
3 to 6 Pc.
11.8 (300) in (mm)
0.25 kW
IP 55
13 to 66 ft/min
(4 to 20)
(m/min)
IP 65
230/400 V
230 V Schuko
230 V CEE
400 V CEE 16 A
400 V CEE 32A
0.28 kW
+41 to +131 °F
(+5 to +55) (°C)
Description and Technical Data
Note
The structure length is variable.
The real structure length is calculated from the
structure length minus 9.8'' (250 mm) at the input
area and 9.8'' (250 mm) at the output area.
plus 187 lbs (85 kg) (control and drive)
depending on the length of the conveyor system
Bevel gear motor with frequency converter fitted
outside (FUG)
Thermal class F, protection against overheating by
thermal contact switch
continuous adjustment
Plastic switch cabinet, sizes: SPV cold distribution,
SPV I, SPV II and SPV III depending on quantity of
sockets and electrical variations
AC, 3Ph NPE 50 Hz
Basic design without sockets
The total power of the belt systems without sockets
depends on the type and number of consumers.
Basically, 3.6 kW per socket, but depending on the
cross section and as a result protection of the supply
line in connection with the load diversity factor.
Technical data
4330053_A7