Setting Up The Pneumatic And Electrical Application Connections - Festo 8108002 Instrucciones De Utilizacion

9.1.3 Setting up the pneumatic and electrical application connections

1. Connect signal line to robot mounting
3. Lay signal lines cleanly
5. Connect pneumatic tubing to distributor
© Festo Didactic 8109530
KUKA training cell for hands-on education in robotics – Application Kit
2. Connect signal lines to robot handling
4. Connect pneumatic tubing to robot handling module
6. Connect signal lines to C-Terminal
1 – Spring magazine
2 – Cap magazine
3 – Mounting module
59