Sirona ORTOPHOS 3 Instrucciones De Uso página 61

Sirona Dental Systems GmbH
Operating Instructions ORTHOPHOS 3
60 82 262 D 3285
D 3285.201.04.06.02
Standard Exposure Program P1 and P11...
• The patient positions himself before the middle of the
control mirror.
Pressing the height adjustment key ↑ automatically
switches on the light localizer for 1minute.
i
NOTE
Please make sure that the light beam strikes the eyes of
the patient only very briefly.
... with Bite Block
• Using the ↑ and ↓ buttons, adjust unit height so that
the bite block and the anterior teeth match up.
• Have the patient grip the handles.
• Have the patient bite the bite block at the indentation.
The upper anterior teeth should be directly in the in-
dentation, and the lower anterior teeth should be
moved forward up to the stop.
... with Contact Segment
For patients without anterior teeth.
• Adjust the unit height so that contact segment and
subnasals match up.
• The contact segment should be just under the patient's
nose.
• Ensure that the upper and lower jaws are lined up
with each other.
This is facilitated by a cotton roll.
i
NOTE
The height adjustment motor starts up slowly and then
picks up speed. Motoric movement is accompanied by
an acoustic signal.
6 Operation
21