Installing The Energy Meter - Sungrow SG2K-S Manual De Usuario Rápido

2 Installation
4. To protect the inverter from
theft, you can lock it with a
padlock.
purchased by the user if
necessary. The hole diameter
is about 8 mm.
5. Remove the waterproof lid
from RS485
install the
module to the inverter. Refer
to the manual delivered with
the module for details.

2.3 Installing the Energy Meter

The SUNGROW Energy Meter should be installed between the grid and the
load. It supports a 35 mm DIN-rail installation, as shown in the following figure.
Single-phase Energy Meter
6
The padlock
terminal and
communication
Fig. 2-1 Installing the Meter to the Rail
is
Three-phase Energy Meter
Quick User Manual