Installing The Inverter - Sungrow SG2K-S Manual De Usuario Rápido

2 Installation
7. Prevent the inverter from direct exposure to sun, rain and snow.
8. Install at eye level for easy
inspection.
10. Never install the inverter horizontally, or with a forward tilt or with a
backward tilt or even with upside down. The horizontal installation can
result in damage to the inverter.
Forward tilt
11. Refer to the following figure for the clearance requirements. For
multi-row installation, the distance between two adjacent rows should be
at least 400 mm.
400 mm 400 mm

2.2 Installing the Inverter

Inverter is installed on the wall by means of wall-mounting bracket and the
expansion plug sets.
The expansion plug set shown below is recommended for the installation. They
are not included in the delivery scope.
4
9.
Backward tilt
Install vertically for good heat
dissipation.
Horizontally
Quick User Manual
Upside down