Travel Program; Parameters - Jungheinrich ECR 327 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5.2

Travel program

The vehicle comes with three travel programs. The active program is indicated by the
green LED (24), keys 1, 2 and 3.
NOTICE
The travel programs can be customized to the vehicle use.
5.3

Parameters

In programming mode the keypad can be used to set the code lock functions and to
customize the travel programs. It can also be used to set battery parameters.
NOTICE
On vehicles without an information display (CANDIS (o)), only the code lock
parameters can be set.
Parameter groups
The parameter number comprises three digits. The first digit indicates the parameter
group as shown in Table 1. The second and third digits are numbered consecutively
from 00 to 99.
No. Parameter group
0xx Code lock settings
(codes, travel program enables, automatic shutdown, etc.)
1xx Travel parameters for travel program 1
(acceleration, coasting brake, speed, etc.)
2xx Travel parameters for travel program 2
(acceleration, coasting brake, speed, etc.)
3xx Travel parameters for travel program 3
(acceleration, coasting brake, speed, etc.)
4xx Parameters not relating to the travel program
E 36

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ecr 336

Tabla de contenido