Safety Recommendations - Sincro SK 400 Manuale Di Uso E Manutenzione

ENGLISH

1. SAFETY RECOMMENDATIONS

We thank you for having chosen a Sincro product, and
we are sure that it will satisfy all your expectations in high
standards and performance.
The "User and Maintenance Manual" included with the
generator pro vides important indications regarding safety,
installation, use and main te nance. This product complies
with recognised standards in good en gi neer ing and
provisions related to safety.
When contacting Sincro Srl, always report the generator
type and code, found on the label attached to the packing.
What's more, in the event of malfunction or any other kind
of machine fault that should require our Aftersales Service,
please specify the serial number (SN) and pro duc tion
order (PO).
ALTERNATOR'S
ALTERNATOR'S
CODE
SERIAL N°
3 - phase model:
Serial No: 091984
Code: Z58982L/864362509X2H9
800 kVA Duty type: S1
858 kVA Duty type: St-by Temp. rise:163°C Amb. temp: 27°C
400 V 1155 A
Excit. 45 V
Weight: 1545 kg
Year: 2009
An incorrect installation or improper use of
the product may cause damage to persons
and objects.
CAUTION!
• Strictly observe the instructions given in the "User and
Maintenance Manual" that is provided to indicate the
correct conditions for in stal la tion, use and maintenance,
in order to prevent malfunctions in the gen er a tor and avoid
hazardous situations for the user.
• Dispose of all packing material (i.e. plastic, cardboard,
polystyrene, etc.) according to statutory regulations.
• Keep the instructions with the technical folder and for
future con sul ta tion.
• This product has been designed and constructed solely
for the ap pli ca tions indicated in this manual. Any use not
specifi ed in this manual may cause damage to the product
and become a source of hazard.
• Sincro S.r.l. declines all liability arising from any use
whether im prop er or differing from its original concept and
specifi ed in this manual.
• Do not install the product in a potentially explosive
atmosphere.
• The plant component elements must comply with European
Di rec tives. To ensure good safety levels, these standards
18
ALTERNATOR'S PRODUCTION
TYPE
ORDER N°
SINCRO s.r.l.
Cornedo (VI) ITALY
Tel. +39 0445 450 500
www.sogaenergyteam.com
SK 400 SX-4
P.O:
F 05636015
Temp. rise: 125 °C Amb. temp: 40
0,8 P.F. 1500 rpm 50
2.5 A Ins. cl: H/H
ENCLOSURE: IP 21
According to IEC 60034-1
should also be ob served in non EU countries, in addition
to the country specifi c statutory reg u la tions.
• The installation must comply to the law in force in the
country where it is done and must be car ried out solely by
qualifi ed specialists.
• Do not start up the generator if the protective covers,
the access panels or the terminal box cover have been
removed.
• Before performing any maintenance:
- disable the starter circuit of the engine,
- disable the closing circuits and / or place warning
labels on each cir cuit breaker used for connecting to
the network or to other generators, in order to prevent
accidental closure.
• Only use genuine parts for any maintenance or repair.
Failure to ob serve this recommendation shall free Sincro
S.r.l. from all responsibility related to the generator safety
and good operation.
• Train the plant operator in the management, use and
maintenance of the generator.
• Anything not expressly prescribed in these instructions is
pro hib it ed.
°C
Hz