GreenWorks Tools 2600807 Manual De Utilización página 8

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
M t o r o
Vibration
Sound pressure level
Sound power level
No-load speed
Clearing width
Clearing depth
Imeller size
Discharge distance
Battery pack
Charger
Weight (without battery)
DESCRIPTION
The machine is made up of the following main compo-
nents :
1. Battery compartment
2. Auxiliary handle
3. Lock knob
4. Belt drive cover
5. Impeller
6. Scraper
7. Lock-out button
8. Trigger switch
9. Safety key
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories
English (original instructions)
4 0 V
2
2
2.5m/s , k=1.5m/s
63dB(A), k=3.0 dB(A)
85dB(A)
1800 RPM
12 in. (30 cm)
4 in. (10.2 cm)
11 in. (27.8 cm)
20 ft. (6 m)
29727
2910907
7.24 kg
from the box. Make sure that all items listed in the
packing list are included.
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
Greenworks tools service centre for assistance.
PACKING LIST
Snow shovel
Owner's Manual
If any parts are damaged or missing, do not operate this
product until the parts are replaced.
Failure to heed this warning could result in serious per-
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental start-
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
result in a hazardous condition leading to possible seri-
CONNECTING THE SHAFTS
Align the pin (B) on the handle shaft and the hole (A)
on the lower shaft.
Turn the lock knob clockwise until it is fully tightened.
3
WARNING
WARNING
WARNING
WARNING