Stihl FS 300 Manual De Instrucciones página 67

Fitting the mowing head
2
Turn the mowing head
N
counterclockwise as far as possible
onto the shaft (2)
Block the shaft
N
Tighten the mowing head
N
NOTICE
Remove the tool that was used to block
the shaft.
Removing the mowing head.
Block the shaft
N
Rotate the mowing head clockwise
N
FS 300, FS 350, FS 380
Mounting and removing the metal
cutting attachment
Keep the information sheet and
packaging for the metal cutting
attachment in a safe place.
WARNING
Put on protective gloves – risk of injury
by the sharp cutting edges
Always fit only one metal cutting
attachment!
Brush knives
Position cutting attachment
The cutting edges of the brush knife with
2 or 3 blades can face in any direction.
Turn the cutting attachments over
regularly to avoid wearing one side.
Mounting the cutting attachment
Attach guard ring for mowing
N
applications
4
3
2
b
a
Position cutting attachment (1)
N
WARNING
Collar (a) must engage the hole (b) in
the cutting attachment!
Securing the cutting attachment
Fit the thrust washer (2) – curvature
N
faces upward
Fit rider plate (3) for mowing
N
applications
Block the shaft
N
Screw nut (4) counterclockwise
N
onto shaft and tighten.
WARNING
Nuts that move too easily must be
replaced.
English
1
65