Balancing The Machine - Stihl FS 300 Manual De Instrucciones

Ocultar thumbs Ver también para FS 300:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Disconnecting the machine from the
harness
1
2
Press the spring on the snap
N
hook (1) and remove the perforated
strip (2) from the hook
Putting down the machine in an
emergency
WARNING
As soon as it becomes apparent that a
dangerous situation is developing, the
machine must be put down quickly.
Practice setting down the machine
quickly. In order to avoid damage, when
practicing, do not throw the machine on
the ground.
70
If using a shoulder strap: practice sliding
the strap off your shoulder and quickly
disconnecting the machine from the
snap hook.
If using a full harness: practice quickly
opening the lock plate (4) on the full
harness and sliding the harness off your
shoulders.
1
2
1
2

Balancing the Machine

The machine will balance differently
depending on the cutting attachment
mounted.
Let the machine swing on the
N
harness until it stops moving –
change the connection point if
necessary
Mowing attachments
Mowing heads, brush knives and
shredder blades should rest lightly on
the ground.
Circular saw blades
Circular saw blades should "hover"
approx. 20 cm above the ground.
FS 300, FS 350, FS 380

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fs 350Fs 380

Tabla de contenido