Reassemble The Machine And Lubricate Components - Vollrath Stoelting CBE117-37 Manual Del Operador

REASSEMBLE THE MACHINE AND LUBRICATE COMPONENTS

All parts should be cleaned, sanitized and allowed to air dry before
assembling.
NOTICE: Total Blend, Petrol-Gel or equivalent food-safe lubricant
must be used when lubrication of machine parts is
specified.
NOTICE: The United States Department of Agriculture and the Food
and Drug Administration require that lubricants used on
food processing equipment be certified for this use. Use
lubricants only in accordance with the manufacturer's
instructions.
1. Turn off and unplug the machine.
2. Press the gear into the bottom of the vertical drive shaft.
3. Lubricate the gear teeth with food-safe lubricant.
4. Insert the vertical auger into the machine and tighten the nut.
10
5. Verify the bushing is in place. Press the gear onto the back of the
horizontal auger.
6. Lubricate the gear teeth with food-safe lubricant.
7. Install the horizontal auger into the machine.
8. Lubricate the metal tip of the auger with food-safe lubricant.
9. Install the gasket into the groove on the bottom of the tank. Make
sure the joint of the gasket is placed on one of the rear corners of the
tank.
Joint
®
Stoelting Granita Frozen Beverage Dispensers Operator's Manual