Features And Controls Overview - Vollrath Stoelting CBE117-37 Manual Del Operador

FEATURES AND CONTROLS OVERVIEW

A
B
.
A Power Button. Turns the machine On and Off.
B High Pressure Indicator Light. Illuminates when the machine
has a pressure condition that needs attention.
C Minimum Tank Level Sensor. Senses when the mix level in the
tank is too low.
D Spigot Lock. Locks the spigot in either the open or closed
position.
E High Pressure Reset Button. Resets the compressor after a
high pressure situation. Older two and three bowl machines
have an internal reset. Refer to the Technical Field Information
document on Vollrath.com for instructions on how to access the
reset.The Machine must be on when the reset button is pressed.
®
Stoelting Granita Frozen Beverage Dispensers Operator's Manual
C
F
D
E
F Menu Button. Access to the machine settings.
LAMP. Turns the light under the lid ON or OFF
BYPASS. Enables the augers to rotate when the cover is
removed.
LOWLEVEL. Automatically changes the slush setting to 1 when
the amount of mix in the tank drops below the minimum fill
point. This prevents the product from over-freezing. Vollrath
recommends turning on this setting.
KEYBOARD. Locks the keyboard to prevent accidental changes.
WASHING. Use for cleaning the machine. Turns off refrigeration,
turns on auger rotation and locks all keyboard functions except
MENU.
TIME. Sets the local time.
DEFROST ON. Sets the time at which the machine enters the
defrost mode. 24 hour format, no AM/PM.
DEFROST OFF. Sets the time at which the machine exists defrost
mode. 24 hour format, no AM/PM.
MAX TEMP. Displays a warning on the screen if the temperature
of the product is warmer than the setting. For food safety,
Vollrath recommends enabling this setting when using milk-
based mixes.
CLEANING. Sets a schedule for cleaning the machine and
displays a message when it is time to clean the machine.
AUTOFILL. Displays a warning if the tank is not automatically
refilled.
G Mode Button
SLUSH. Nine density settings.
COLD DRINK. Five cold settings.
STANDBY. Pauses the machine.
H Arrow Buttons. Change settings.
I Auger Button. Starts and stops auger rotation. Also a navigation
button for some menu options.
G
H
I
H
3