Final Installation - Harbor Breeze E-AER52BRZ5LKRCI Manual De Instrucciones

FINAL INSTALLATION

1. Lift canopy (B) to mounting bracket (C) and
align slotted holes in canopy (B) with loosened
canopy mounting screws (L) in mounting
bracket (C). Twist canopy (B) to lock, then
insert the two canopy mounting screws (L) and
star washers (P) previously removed (Step 4a,
page 7). Tighten all canopy mounting screws
(L) securely.
Install bulb (J).
2.
Tip: Do not touch glass portion of bulb (J) with
fingers or hands. Oil from skin can cause
bulb (J) to overheat and go out prematurely. Use
cardboard box or foam wrapping bulb (J) was
packed with to layer around glass portion of
bulb (J).
IMPORTANT: When replacing bulb, allow bulb
and glass shade to cool down before touching.
Keep in mind not to touch the bulb itself as
described above.
3. Align openings in grooves of glass shade (O) with
nodules on underside of motor housing (D). Turn
glass shade (O) clockwise until it no longer turns.
Pull down very gently on glass shade (O) to ensure
it is securely attached.
1
2
J
3
O
Lowes.com/harborbreeze
13
P
L
P
L
B
D