Removing The Bearings - Look ZED 3 Manual Del Usuario

EN
Specific assem-
bly tool
Dismantling the 1st bearing
[ A ]
[ B ]
[ C ]
Dismantling the 1st bearing
[ D ]
Directly slide the fitted middle into the frame, placing the disassembly ring as a support on the bearing.
Hit the tool with the mallet to remove the bearing.
40

REMOVING THE BEARINGS

Specific tool
exploded view
Slide the disassembly ring into the bracket to support
the inside of the bearing.
- Use the planes to pass through the 1st bearing.
- Place the ring back in the bracket.
- Place the ring to support the bearing.
Lift the whole tool onto the disassembly ring.
Hit the tool with the mallet to remove the bearing.
Remove the disassembly ring to remove the middle.
Disassembly
ring
Fig 14