Safety Features - SICK TR4 Instrucciones De Servicio

Operating Instructions
TR4
8014467/YIJ2/2015-03-02
Subject to change without notice
Product description
Magnetic retaining force
The safety switches of type TR4-SFxxxx are equipped with built-in
magnets. These magnets draw the actuator to the sensor with their
retaining force such that the guard (e.g. a protective door) is retained
with a certain force. This feature makes more difficult the unintentional
opening of the guard in case of disturbances such as shock and vibra-
tion and increases the availability of the machine.
3.2

Safety features

The TR4 safety switch has the following safety features:
SIL3 according to IEC 61 508
category 4 according to EN ISO 13 849J1
PL e according to EN ISO 13 849J1
type 4 according to EN ISO 14 119
– TR4 Multicoded: low level coded actuator
– TR4 Unique Coded: high level coded actuator
Operational safety
The TR4 safety switch has the following internal protective functions:
short-circuit protection on all outputs
overload protection on all outputs
reverse polarity protection of the operating voltage
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
en
Chapter 3
65