Safety Notes; Regular Use Of The Devices - SICK C2000 Manual Del Usuario

Operating Instructions
C 2000
M 2000
Note
E x p l a n a t i o n
Recommendation
DANGER
8008684/YJC8/2015-03-30
8 008 684/RI57/2007-11-28

Safety notes

1 1 1 1 1
Symbols and notation used
in this document
A number of items of information appearing in these operating
instructions have been specially emphasized to make this information
easier to find.
A note gives information concerning special features of the device.
An explanation provides background information which is intended to
broaden your understanding of the technical aspects associated with
operation of the device.
A recommendation will help you to perform the respective action with
optimum efficiency.
Warning!
Always read warning notes thoroughly and follow them carefully.
2 2 2 2 2
Safety notes
The device can only perform its safety task if it is used correctly and
incorporated properly in the process sequence.
The safety light curtain C 2000 and the multibeam photoelectric safety
switch M 2000 conform to the requirements of IEC 61496, safety type 2.
2.1

Regular use of the devices

The safety light curtain C 2000 serves as a hand guard to safeguard
danger points on machinery and plant. The multibeam photoelectric
safety switch M 2000 is used as a personal protection facility to
safeguard danger areas on machinery or plant.
The devices are permanently mounted in the area of access to the
danger point, and stop the hazardous motion when at least one light
beam is broken.
© SICK AG • Safety Systems • Germany • All rights reserved
Chapter 2
2 4 5