Technical Features - Bartscher 70 Serie Instalación Uso Y Mantenimiento

The following instructions for set up and functioning refer to gas and mixed appliances belonging to
categories I , II
3B/P
Buthane/Propane (G30- G31) of 30/37 mbar (50 mbar for II
G25- G25.1) of 20/25 mbar, and for Town Gases (G110-120) of 8mbar. The data plate (fig. 2 – pag.
2) with all the information to refer to regarding the appliance, is situated inside the right or left side
of the control panel, depending on the model.
The appliances have been checked in accordance with the European directives below.
73/23/EEC - Low Tension (LVD)
89/336/EEC - Electromagnetic Compatibility (EMC)
90/396/EEC - Gas Appliances
93/68/EEC - Modifications to the directives
98/37/EC - Appliance to the directives
And the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC directives and requires that installation be done observing the norms in force,
regarding particularly the system for letting out fumes and air exchange.
Gas Fryer
A sturdy structure in steel placed on four feet, which make it possible to regulate the height in
the version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
Each vat is provided with a thermostatic safety gas valve, which enables the regulation of the
temperature in a range from 100° C to 190° inclusive; safety is ensured by means of a thermo-
couple, which is kept active by the flame of the pilot burner.
The vat is made entirely of stainless steel.
It is heated by means of a stainless steel tubular burner, suitable for proper functioning at the high
temperatures to which it is exposed
Electric Fryer
A sturdy structure in steel placed on four feet, which make it possible to regulate the height in
the version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
It is provided with a thermostat which makes it possible to regulate the temperature in a range from
100° C to 190° C inclusive, safety is ensured by a manually operated safety thermostat.
The vat is entirely of stainless steel.
It is heated by an electric immersion heater, which is immersed in the oil.

TECHNICAL FEATURES

, II , II
2H3+ 2H3B/P 2HS3B/P
DESCRIPTION OF APPLIANCES
, III II
1ab2H3B/P, 2ELL3B/P
2ELL3B/P
Pag. 44/87
with a power pressure for
category) , for Methane (G20-