7.3.1 Unpacking
7.3.1.1
Unpack the machine according to the unpacking instructions on the packaging box, remove the surrounding packaging materials, check if
the machine is damaged during transportation and if the accessories are complete.
The power and air sources shall be cut off before the installation!
7.3.1.2
70
AE1016H/AE1016H-3
中文
EN
DE
Open the packaging box, check the contents according to
"Accessories Catalog" and Fig. 3. Wipe and clean it and
get prepared for the assembly. The assembled machine is
as shown in Fig.4. Prepare the required tools.
Fig. 3
Fig. 4
RU
KO
PT
JA
ES