SATA AE1016H Instrucciones De Uso página 73

7.3.2.5
Insert one end of ф8P tube (Fig. 3-1) into the remaining interface of Y-type tee and the other end into the inlet of pressure regulating valve
of auxiliary arm.
7.3.2.6
7.3.2.7
Lift the control valve handle to make the shifting seat of auxiliary arm move upwards; lower the handle to move the shifting seat
downwards.
If there is no air leakage, crawling and shaking, and each part rotates and slides normally, the auxiliary arm is successfully installed.
AE1016H/AE1016H-3
中文
EN DE
Fix the piece (Fig. 3-8) to the corresponding position on the
auxiliary arm with the piece (Fig. 3-7) and tighten it. Secure
the pieces (Fig. 3-9) and (Fig. 3-8) together with the piece
(Fig. 3-6) and tighten them (Fig. 10).
Fig. 10
RU KO PT JA ES
73