Basic Structure And Combination Of Right Auxiliary Arm; Installation And Commissioning Of Equipment - SATA AE1016H Instrucciones De Uso

7.2 Basic Structure and Combination of Right Auxiliary Arm

7.3 Installation and Commissioning of Equipment

- Please read this manual in detail before the installation and commissioning. Any modification to the machine parts and scope of use
without the permission of manufacturer or not in line with the instruction may result in the direct or indirect damage to the machine.
- Installation and commissioning personnel shall have certain mechanical operation and maintenance knowledge.
- Operator shall be specially trained and qualified.
- Please check the equipment list carefully before installation. In case of any doubt, please contact the dealership or the company
immediately.
To ensure the smooth installation and commissioning, the following common tools shall be provided:
Monkey wrench (10") 2 pieces
Sleeve wrench 1 set
Internal hexagon wrench 1 set
Vise 1 piece
Screwdriver 1 set
Hammer 1 piece
Multimeter 1 piece
AE1016H/AE1016H-3
中文
EN DE
1. Lifting Control Handle
2. Tire-Pressing Block
3. Tire-Holding Large Plate
4. Bracket
5. Column
6. Tire-Pressing Roller
7. Cylinder
RU KO PT JA ES
69