SATA AE1016H Instrucciones De Uso página 76

7.4.2 Tire-mounting operation:
Check if the sizes of tire and rim are the same before installing the tire!
7.4.2.1
Clean the dirt and rust of rim and lock it on the round turntable. Select the exterior clamping or interior supporting according to the rim.
However, the disengaging groove shall be at a higher position.
7.4.2.2
76
AE1016H/AE1016H-3
中文
EN DE
Fig. 16
Fig. 17
Apply the bead with the lubricating grease. Place the
tire on the rim with the front end upwards and press the
leaning pedal of column to retract the column. Move the
dismounting head to make it against the rim, place the
left half of lower bead above the tail of dismounting head
and the right half under the spherical protrusion of the
dismounting head (Fig. 18).
Fig. 18
RU KO PT JA ES