EMCA-EC-67-...
Auxiliary supply +24 V DC, pin 3 at [X6]
Nominal voltage
– Voltage taken from the drive
(supplied at [X4])
Nominal current
Tab. 13
Technical data: Electrical data of the auxiliary supply output
Signal lines
Max. cable length
Conductor cross-section
Tab. 14
Technical data: Cabling at [X6]
4.3
Product conformity and certifications
Product conformity and certifications
CE marking (declaration of conformity
è www.festo.com/sp)
2)
Approvals
1) The component is intended for industrial use. Outside of industrial environments, e.g. in commercial and mixed-residential areas,
actions to suppress interference may have to be taken.
2) Only valid for product variants with corresponding marking
Tab. 15
Product conformity and certifications
Requirements for observing the UL certified conditions if the product is operated in
the USA or Canada can be found in the separate UL documentation.
40
[V DC] 24
[mA]
100 (max.)
Not overload-proof
[m]
30
[mm²]
0.05 ... 0.36
In accordance with EU Machinery Directive 2006/42/EC
In accordance with EU EMC Directive 2014/30/EU
RCM (Regulatory Compliance Mark)
c UL us - Recognised (OL)
Festo – EMCA-EC-67-... – 1603 English
1)