Target Group; Service; Documentation - Festo EMCA-EC-67 Serie Traducción Del Manual Original

EMCA-EC-67-...

Target group

This documentation is intended exclusively for technicians trained in control and automation techno­
logy who have experience in installation, commissioning, parameterisation, programming and dia­
gnostics of electrical drive systems.

Service

Please consult your regional Festo contact if you have any technical problems.

Documentation

For all available documents relevant to the delivery status of the product
è www.festo.com/pk.
This document only describes the usage of the safety function "Safely switched off torque" (Safe
torque off/STO) in accordance with EN 61800-5-2, which is implemented in the EMCA. The complete
description of the product includes the following documents:
Designation
Brief documentation
EMCA-...
Manual
1)
GDCE-EMCA-EC-SY-...
GDCE-EMCA-EC-DIO-...
Manual
GDCE-EMCA-EC-S1-...
Manual
GDCE-EMCA-EC-C-HP-...
Manual
GDCE-EMCA-EC-C-CO-...
Help system for the FCT software
(help for the EMCA plug-in)
Special documentation
EMCA-EC_UL-...
1) Only relevant for product variants with bus interface
2) Only relevant for product variants with I/O interface
Tab. 1 Documentation on the product
Festo – EMCA-EC-67-... – 1603 English
Contents
Brief device and functional description for initial information
Device and functional description
– Mounting
2)
– Installation (pin allocations)
– Drive functions
– Commissioning instructions
– Error messages
– Technical data
Description of the safety function "Safely switched-off torque"
(Safe torque off/STO)
Description of the device profile FHPP (Festo Handling and
1)
Positioning Profile)
Description of the device profile CiA 402
1)
Online help of the Festo Configuration Tool (FCT) for commis­
sioning and parameterisation
Requirements for operating the product in the USA and
Canada in accordance with certification by Underwriters Labor­
atories Inc. (UL)
23