Requirements For Product Use; Training Of Specialized Personnel; Range Of Application; Specified Directives And Standards - Festo EMCA-EC-67 Serie Traducción Del Manual Original

EMCA-EC-67-...
1.2

Requirements for product use

For correct and safe use of the product in a machine or system:
• Provide the complete product documentation of the product to the following specialists
– the design engineer and the installer of the machine or system
– the personnel responsible for commissioning
• Have the documentation available throughout the entire product lifecycle.
• Ensure compliance with all of the specifications in the documentation for the device è Tab. 1.
• Also take into consideration the documentation for the other components (e.g. cables).
• Take into consideration all of the legal regulations that are applicable for the installation site, as
well as the following documents:
– regulations and standards
– regulations of the testing organisations and insurers
– national specifications
For correct and safe use of the STO function:
• Conduct a risk assessment for your machine or system.
• Comply with the specified safety characteristics è Chapter 4, Technical data.
• Comply with the connection and environmental conditions - in particular the voltage ranges of the
product and all connected components. Only compliance with the limit values and load limits will
enable operation of the product in compliance with the specified safety regulations.
1.2.1

Training of specialized personnel

The function should only be integrated into the machine by a qualified electrical technician of the ma­
chine manufacturer. The qualified technician must be familiar with:
– installation and operation of electrical control systems
– applicable regulations for operating safety-engineering systems
– applicable regulations for accident prevention and operational safety
– documentation for the product
1.2.2

Range of application

The device has the CE marking. The product-relevant EC directives are listed in the declaration of con­
formity. Certain configurations of the product have been certified by Underwriters Laboratories Inc. (UL)
for the USA and Canada (documentation è Tab. 1). Additional information:
– Certificates and the declaration of conformity è www.festo.com/sp
– Standards and test values è Chapter 4, Technical data
1.2.3

Specified directives and standards

Version status
2006/42/EC
2014/30/EU
EN ISO 13849-1:2008-06/AC:2009-03
Tab. 2 Directives and standards specified in the document
Festo – EMCA-EC-67-... – 1603 English
IEC 61508:2010-04
EN 61800-5-2:2007-10
EN 62061:2005-04
27