Recovery; Bluetooth & App; Cleaning And Maintenance - Tunturi Bike E50 Manual Del Usuario

Cardio mode.
-
confirm by press MODE.
-
55% = 55% of 220 minus age.
75% = 75% of 220 minus age
90% = 90% of 220 minus age
=
confirm by press MODE.
-
confirm by press MODE.
-
confirm by press MODE.
-
- Use RESET, to go back to main menu.
Watt Mode.
-
confirm by press MODE.
-
confirm by press MODE.
-
confirm by press MODE.
-
- Use RESET, to go back to main menu.
In Watt mode, the tension will be adjusted automatically to an
insensitivity in where the Watt reaches the Pre set Watt target.
• The Watt parameter is a calculation of RPM and Tension level.
When RPM is higher, the tension will be lower.
When RPM is lower, the tension will be higher.
User Profile
-
confirm by press MODE.
-
segment.
confirm by press MODE.
- Repeat the rest of the profile segment tension levels too in the same
manner.
- Press and hold MODE button for 2 seconds to confirm and store the
set User Profile.
-
confirm by press MODE.
-
- Use RESET, to go back to main menu.
In User Program profile mode, the tension will be adjusted automatically
to the pre set profile.
training time.
• There is one user program available per user.

Recovery

-
-
-
recovery status. User can find the heart rate recovery level based on
the chart below.
-
F1 Outstanding
F2 Excellent
F3 Good
F4 Fair
F5 Below average
F6 Poor
Body Fat
-
- During measuring, users have to hold both hands on the hand grips.
finish measuring.
-
Body fat mode error codes
- *E-1
There is no heart rate signal input detected.
- *E-4
Bluetooth & APP
-
- Establish the Bluetooth connection only via the connection mode on
-
establisched the console display will be dimmed.
• Tunturi only provides the option to connect your fintess console
throughout a blue tooth connection. Therefore Tunturi cannot be
held resposible for damage, or malfunctioning of products other
than Tunturi products.
•
This console can receive a Bluetooth heart-rate transmitter. There is no
need to pair the defice, as the console will auto detect the heart-rate
transmitter when it is in range.

Cleaning and maintenance

The equipment does not require special maintenance. The equipment
does not require recalibration when it is assembled, used and serviced
according to the instructions.
• Do not use solvents to clean the equipment.
2 3
English