Publicidad
HARDWARE USED
Item H-11
Item H-4
Item H-3
Item H-13
Item H-5
Item H-7
Item H-10
Item H-8
P/N 21412507 11/04
IMPORTANT! Test fit bolts into holes of brackets (P-6) and carefully
1.
rock them in a circular motion to ream out paint from holes if
necessary.
Fit spacer (H-4) into pawl (P-8). Assemble board brackets (P-6)
together using bolts (H-5, H-3), support brackets (P-7) and
nuts (H-13, H-11) and spacers (H-4).
Item H-6
H-5
2.
P-6
P-7
P-6
Item H-12
P-6
H-4
H-3
Attach lower elevator tubes (P-9).
IMPORTANT! Flip pawl (P-8) back to allow easier access to
assembly area. Bolt (H-6) must be inserted through tube (P-9),
spacer (H-7), support bracket (P-7), board bracket (P-6),
ratchets (P-10) and spacer (H-12).
P-8
H-6
H-7
H-10
P-9
12
P-6
H-13
H-4
P-7
H-12
P-10
IMPORTANT!:
DO NOT TIGHTEN
HARDWARE
COMPLETELY.
H-11
P-7
P-8
H-8
P-9
H-7
H-10
IMPORTANT!:
DO NOT TIGHTEN
HARDWARE
COMPLETELY.
Publicidad
