Publicidad
HARDWARE USED
Item H-19
Item H-9
Item H-6
Item H-8
Item H-14
(Not Actual Size)
P/N 21412507 11/04
POLE MOUNTING
Assemble mounting brackets (P-12) to 3-1/2" (8.9 cm) pole as
1.
B
shown. Position bracket assembly to approx. 106-3/4" (2.71 m)
above level playing surface and approximately 6-5/8" apart.
Tighten nuts (H-19) and washers (H-9) onto u-bolts (H-14)
completely.
106-3/4"
(2.71 m)
Mount assembled elevator components to mounting bracket (P-12)
2.
B
as shown. (Refer to Section A for elevator assembly.)
WARNING!
USE CAUTION; ELEVATOR
ASSEMBLY IS HEAVY.
TWO PEOPLE REQUIRED FOR
THIS PROCEDURE. FAILURE
TO FOLLOW THIS WARNING
COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY
DAMAGE.
IMPORTANT!:
Tighten nut (H-8) until
flush with end of bolt
(H-6)
20
FRONT
VIEW
Equal rotations of nuts on
each side of
u-bolt (H-14) are necessary.
P-13
P-12
H-9
H-19
H-8
P-9
NOTE:
H-14
P-12
H-6
Publicidad
