Introduction; Operating Modes; Operation Via Balance/Scale Connection; Lv11 Controlled By Sqc14 - Mettler Toledo LV11 Istrucciones De Manejo

METTLER TOLEDO LV11
1

Introduction

The LV11 is an automatic feeder for small parts, particularly tablets and capsules, but also small
mechanical parts. They are weighed individually on a balance or scale and statistically evaluated in
an attached controller. The LV11 delivers a part to the balance/scale, stops automatically and then
delivers the next part to the weighing instrument after receipt of the appropriate command. This
process can be stopped at any time by a command. At the end of a sample, the feeder plate can be
emptied or the feeder waits for the command for a further sample.
2

Operating modes

2.1 Operation via balance/scale connection

start ready
stop test
LV11 Automatic Feeder
empty

2.2 LV11 controlled by SQC14

read
start intensity
y
LV11 Automatic stop test run 1 2 4 3 up
Feeder
empty down
RS232
start ready intensity
stop test run 1 2 3 4 up
LV11 Automatic Feeder
empty down
SQC14
RS232 null modem
LocalCAN

2.3 LV11 controlled by a PC

start ready intensity
stop test run 1 2 3 4 up
LV11 Automatic Feeder
empty down
RS232 null modem
RS232
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connection to SQC15, SQC-AX, XP Waage, Remote AX, Remote XP
LV11 can be controlled by a METTLER TOLEDO balance with LocalCAN
or RS232 interface. The program for the control must be available in
the weighing instrument (e.g. SQC15 cassette, SQC-AX application,
intensity
Statistics application in XP balance).
run 1 2 3 4 up
down
Balance with RS232 interface:
LV11 and balance are connected with a RS232 Y-cable
(21900921).
SQC14
Balance with LocalCan interface:
Balance and SQC14 are connected with a LocalCan cable.
LV11 and SQC14 are connected with a RS232 null modem cable
(21900576)
Freeweigh.Net test place module or FreeWeigh.Net Compact
or LabX pro balance with LV11 AddOn
Balance connected to PC with RS232 cable (e.g. 11101051)
METTLER TOLEDO
LV11 connected to PC with RS232 null modem cable
(21900576)
For the integration into further PC systems the SICS commands
are listed in section 3.3.