W Commands Of The Lv11 - Mettler Toledo LV11 Istrucciones De Manejo

LV21 Request MT-SICS version of the interface
LV21_A_"X1"_"X2"_"X3"_"X4"_"X5" , where
X1 = MT-SICS level
X2 = Version number of the command set MT-SICS level 0
X3 = Version number of the command set MT-SICS level 1
X4 = Version number of the command set MT-SICS level 2
X5 = Version number of the command set MT-SICS level 3
LV22 Request identification
LV22_A_"LV11" LV11 instrument
LV23 Request software number and type definition
LV23_A_"X1_X2_X3" where
X1 = Software version of the operating system
X2 = Software version of the LV11
X3 = Settings of S4 (decimal value 0-15
corresponding to the binary DIP switch setting)
The LV90 command has been implemented to ensure strings can be transferred from the RS interface
to the CAN interface and vice versa.
LV90_"X1" Transfer of the string X1 from the CAN to the RS interface
LV90_A String has been sent
LV90_"X1" Transfer of the string X1 from the RS to the CAN interface
( only if CAN fitted)

3.4 W commands of the LV11

These commands are used for the control of older METTLER TOLEDO controllers and should not be
used with recent developments. The W commands are recognized by the LV11 only if the RS interface
is the only one active. All W commands as well as activities of the keys start/stop or intensity and the
contact socket are always acknowledged with SICS commands.
W_128_100_0_100_128_100_0
W_160_100_32_100_160_100_32
W_192_100_64_100_192_100_64
W_224_100_96_100_224_100_96
W_128_1000_0
W_128_100_0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Vibrate at intensity level 1 until passage through the light
barrier
Vibrate at intensity level 2 until passage through the light
barrier
Vibrate at intensity level 3 until passage through the light
barrier
Vibrate at intensity level 4 until passage through the light
barrier
Discharge (duration 90 seconds)
Stop
METTLER TOLEDO LV11
7