MBM PEG7750I Manual De Uso E Instalación página 32

"glass" unsiphoned formation.
The appliance must only be
used for the purposes indicated.
Any other use must be consid-
ered "IMPROPER" and therefore the
manufacturer declines all liability for
any consequent damage to persons or
property.
Particular safety prescriptions
(obligation-prohibitions-danger)
are detailed in the specific chap-
ter concerning these issues.
Do not obstruct the heat extrac-
tion and/or dissipation openings.
Do not leave flammable objects
or material near the appliance.
stream the appliance whenever you
need to work in safe conditions.
Whenever it is necessary to op-
erate inside the appliance (con-
nections,
checking operations, etc.) prepare for
the necessary operations (removal of
panels, elimination of supply) in com-
pliance with the safety conditions.
DUTIES AND QUALIFICATIONS
REQUIRED OF OPERATORS
Prohibition for the homogeneous
operator to perform any type of
operation (maintenance and/or
other) without having first read the en-
tire documentation.
The information con-
tained in this document
is for the use of the
qualified technical operator who is
authorised for: handling, installation
and maintenance of the appliance in
question.
The
structions
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
Disconnect all sup-
plies if present (e.g
gas - electrical) up-
commissioning,
operating
have been
drawn up for the "Generic" operator
(Operator with limited responsibilities
and tasks). Person authorised and em-
ployed to operate the appliance with
guards active and capable of perfor-
ming routine maintenance (cleaning
the appliance).
The operators who use the ap-
pliance must be trained in all as-
pects concerning its functioning
and safety features. They must there-
fore interact using appropriate meth-
ods and instruments, complying with
required safety standards.
The "Generic" operator
operate on the appliance after
the technician has completed in-
stallation (transportation, fixing electri-
cal, water, gas and drain connections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of interven-
tion and the relevant work zones, the
following classification is provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in whi-
ch the presence of an exposed person
constitutes a risk in terms of the health
and safety of such a person;
• Exposed person: any person that is
found wholly or partly in a dangerous
zone.
Maintain a minimum distance
from the appliance when operat-
ing in such a way as to avoid en-
dangering the safety of the operator in
case of unexpected circumstances
The following are also danger zones
/ • All the work areas within the appli-
ance • All the areas protected by appro-
priate safety and protection systems
such as safety photocell photoelectric
curtains, protective panels, interlocked
doors, protective casing. • All the zones
within the control units, electrical cabi-
in-
nets and junction boxes.
- 6 -
must
.