MBM PEG7750I Manual De Uso E Instalación página 46

used. Wear protective equipment sui-
table for the operations to be performed
(see the protective equipment carried
on the package label).
In the event of prolonged inacti-
vity, besides disconnecting the
supply lines, you must thorou-
ghly clean all the inside and outside
parts of the appliance.
Wait for the temperature of the ap-
pliance and all its parts to cool off,
so that the operator is not burnt.
DAILY CLEANING
liquid detergent on the whole surface
(cooking compartment, lid and all
exposed surfaces) and using a non-
abrasive sponge, clean the entire
appliance thoroughly by hand.
When finished, rinse abundantly with
tap water (do not use pressurised direct
water or steam cleaners jets for cleaning
operations).
Empty the water with the drainage
gate valve. Open the pot drainage
gate valve only after having placed an
appropriate recipient below it. Fill the
recipient halfway to handle it safely.
Empty the container in compliance
with waste disposal procedures local
in force in the country where the
appliance is used and reposition the
emptied recipient in its housing.
Repeat the aforementioned operations
until the pot is empty.
When these operations have been
performed successfully, dry the cooking
compartment carefully using a non-
abrasive cloth.
If necessary, repeat the operations
described above for a new cleaning cycle.
CLEANING FOR PROLONGED
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
Remove everything
f r o m t h e c o o k i n g
compartment.
U s e a s t a n d a r d
sprayer to apply the
DEACTIVATION
See chapter 5 / Daily decommissioning
/ Prolonged decommissioning.
When the appliance remains idle for
a long time, perform all the described
daily cleaning procedures.
When operations have finished, wait
for the machine to cool down and
empty the water cavity using the tap
located under the cavity (see chap. 8 /
Location of main components).
Unscrew the drainage tap after posi-
tioning a suitable container (material
and capacity) under the cavity.
Fill the recipient halfway to handle it
safely. Empty the container in com-
pliance with waste disposal procedu-
res in force in the country where the
appliance is used and reposition the
emptied recipient in its housing.
Repeat the aforementioned opera-
tions until the water cavity is empty.
Air out the appliances and rooms
regularly
SUMMARISED TABLE /
OPERATION - FREQUENCY
Before proceeding with the ope-
rations, see chap.2 "Duties and
qualifications"
Should a problem occur, the ge-
neric operator performs the first
search and, if qualified, elimina-
tes the cause of the problem and re-
stores the appliance correctly.
If the problem cannot be resol-
ved, turn the appliance off, di-
sconnect it from the electrical mains
and shut all the supply valves. Then
contact authorized customer service.
The authorized maintenance tech-
nician intervenes when the generic
operator was not able to pinpoint the
cause of the problem, or whenever resto-
ration of correct operation of the applian-
ce entails executing operations for which
the generic operator is not qualified.
- 20 -
MAINTENANCE