Siemens SINAMICS G120 Manual De Configuración página 44

Bloque SINAG120
3.2 Bloque de control
Parámetro Tipo
LIOP_SEL_SP BOOL
LLSP_INT_A REAL
LLSP_INT_M REAL
LOCK BOOL
LOCK_MSS INT
LOCK_ON_OP BOOL
LOCK_OP BOOL
LR_MAN_AUT BOOL
MAIN_D INT
MAIN_L INT
MAIN_M INT
MANOP_EN BOOL
ME_LE_AV INT
ME_LE_SP INT
MO_PVHR REAL
MO_PVLR REAL
MODE DWORD
MODF BOOL
MOT_OFF BOOL
MSG_EVID DWORD
MSG_LOCK BOOL
MSGACKEN BOOL
44
Modalidad Por de‐ Comentario
fecto
IN FALSE Setpoint set:
=0:
=1:
IN -105.0 Lower limit of internal setpoint, control
word automatic
INOUT 0.0 Lower limit of internal setpoint, control
word manual
IN TRUE Linkable input:
=0:
=1:
IN 2 =0:
=2:
=3:
IN FALSE =1:
IN FALSE =1:
IN FALSE Switching local to remote:
=0:
=1:
INOUT FALSE Backup of days since last maintenance
IN 100 Time interval for maintenance low [day]
IN 200 Time interval for maintenance middle [day]
IN TRUE =1:
IN 6 Message length of actual value
Ver capítulo: Ajuste de la longitud de tele‐
grama (Página 87).
IN 6 Message length of setpoint
Ver capítulo: Ajuste de la longitud de tele‐
grama (Página 87).
IN 1.5 PV upper limit
IN -1.5 PV lower limit
IN 0 Parameter OMODE of DES_DIAG
IN FALSE =1:
INOUT FALSE Operator input:
=0:
=1:
IN 0 Message ID
IN FALSE =0:
IN FALSE =1:
By operator
By linking
OFF2
Operating condition
STOP button invisible
STOP button effects OFF2
STOP button effects OFF3
Lock: ON
Ver capítulo: Bloqueo (Página 32).
Lock: OFF
Ver capítulo: Bloqueo (Página 32).
Reactivate previously selected mo‐
de
Activate manual mode
Manual operation enable
Module failure
OFF
ON
Alarming enabled
Evaluate acknowledge state
Manual de configuración, 04/2016
S7_m_c:=TRUE
X = parámetro
de manejo y vi‐
sualización
X
X
X
X
X
X
X
X
X
Bloque SINAG120