Meter And Ignition Switch - Serpento PREDATOR Manual De Usuario

12
The location of parts
(1) Left grip;
(2) Left handle switch;
(3) Meter;
(4) Ignition switch;
(5) Right handle switch;
(6) Right grip;
Vehicle identification number
Vin:
Engine no:
When you register your motorcycle, you have to provide the frame no and engine no. Record these numbers for a rainy day. Please fill in the
blank space provided by the vehicle identification number, engine number, it will also help you to order spare parts from our company or entrust
the special services to us, or when your motorcycle is stolen for use as a query.
The location of identification number
(1) Vin engraved on the frame steering tube.
(2) Engine number engraved at the left side below the engine crankcase.

Meter and ignition switch

Combination ignition switches settings at the bottom of meter. Ignition switch must be open before the start motorcycle.
" " (off): disconnect the entire circuit, the engine should not start, the key can be removed.
" " (on): throughout the circuit closed, the engine can start, the key can not be removed.
Direction lock
If parking and locking direction, you need turn the grip left to the end, and then press down the key from "
anti-clockwise direction rotate to " " (lock) to lock steering, and remove the key; if opening direction locks, simply rotate the key clockwise to
!
!
" (off) position, and through