Cleaning And Storage Of The Vehicle - Serpento PREDATOR Manual De Usuario

(1) Dispatch the spark plug and connect with high-tension lines.
(2) Fix the spark plug onto the vehicle body .Switch on the ignition and turn-off switch to the position，then press the starting button. If the ignition
system is working, there is spark between the two poles of the electrode plate. On the contrary, please contact with the distributors.
DANGER: Do not do this inspection fixing the spark plug near the cylinder, because it is possible that the fuel inside the cylinder can be burned
by the spark.
To avoid the possibility of electric shock，the metal shell of the spark plug is best to attach the metal part of the body without paint. People who's
heart has some problems or with myocardial frequency modulator to avoid doing this inspection.

CLEANING AND STORAGE OF THE VEHICLE

For maintenance of the motorcycle, it should be cleaned periodically. And it should be inspected often.
Before cleaning, you should inspect if the motorcycle is cooled, the installation of the spark plug and all fuel nipples are right or not. It is
suggested that the high pressure water should not be used. Avoid using cleaning products not especially for motorcycle. They may contain
crude or chemical composition of the washing solvent and they can damage the metal, painting and plastic parts on the motorcycle.
CLEANING OF MOTORCYCLE
(1) Use the cold water to wash the dirt of the motorcycle.
(2) Use sponge or soft cloth with cold water to wash the motorcycle. Avoid washing the silencer and electronic parts directly.
(3) Use sponge or soft cloth with solvent mixed by moderate cleaner and water to wash the plastic parts. Use water to scrape the spot.
Avoid the leakage of the brake oil, or it will spoil the paint of the surface of the plastic parts.
After wash the motorcycle, it is possible that the lens inside the front light has water ball in it. Open the high beam and the water ball will vanish
gradually. Please start the engine when you open the headlight.
(4) After cleaning, use a lot of water to wash the whole vehicle. The remained cleaner will rust the alloy parts of the motorcycle.
(5) Dry up the motorcycle and put the lubricant oil on it at once.
40