Check Of Front Shock Absorber; Check Of Rear Shock Absorber; Brake System Check And Adjustment - Serpento PREDATOR Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Check of front shock absorber

Check of appearance
Check whether the front shock absorber bend or distort, check whether there is nick or
oil leak in the inner pipe.
Check of operation
Grip front brake bar to stop wheel, push front shock absorber more times
to observe the front shock absorber whether it is normal return or other noise .
Note: If the front shock absorber is damaged , please repair or replace.

Check of rear shock absorber

Check whether the rear shock absorber leak oil, bend or distort , push rear
shock absorber more times to observe the front shock absorber whether it is
normal return or other noise .
The pre-load of rear shock absorber spring can be adjusted by different load
and condition of driving

BRAKE SYSTEM CHECK AND ADJUSTMENT

• Check the level of the brake oil in the main pump of the brake to see if it keeps above the regulated lower limit, or else the master pump cover
should be removed to add brake oil.
• Screw the bolt, check the brake pads to see if they exceed the worn limit, if yes, they should be replaced.
ADJUSTMENT OF BRAKE
• The free way of the front brake handlebar is 10-20mm, if it is incorrect, it should be adjusted according to the following ways:
• Apply the front brake bar continuously for several times, then grip it, discharge the exhaust screw cap to let out the air in the oil cylinder and
then lock up the screw cap.
• PREDATOR
MANUAL DEL USUARIO
35

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido