Operation Instruction; Running In Period - Serpento PREDATOR Manual De Usuario

3. Operation instruction

Running in period

Running in period means a method undertaken during the first leg to guarantee that the joints among different parts on a motorcycle should be
at the best state.
The mileage for a new motorcycle: 1000 km
Requirements during the running in period
1. To avoid full open throttle, the engine speed is no more than 6.5×1000 rpm
2. Each gear should be applied at least once.
3. Avoid overloading.
4. Oil must be changed for 3 times
The operation during the running in period acts as follows:
(1) 0-300km running-in
When driving, the throttle twist grip should have no more than a half turn. You should stop the engine and cool it for 10 minutes every other
30-minutes drive. You should apply frequently-changed speed and gear. Don`t dirve the vehicle long at a fixed throttle position and a fixed gear.
(2) 300-600km Running-In
Please avoiding turn on throttle handle bar exceed two third when you drive. Forbidden drive by turn on throttle totally. The speed and gearshift
should be changed constantly, please make sure don't drive on the fixed throttle position and the fixed gearshift.
(3) 600-1000km Running-In
Please avoiding turn on throttle handle bar exceed three fourths when driving. Forbidden drive by turn on throttle totally. The speed and gearshift
should be changed constantly, please make sure don't drive on the fixed throttle position and the fixed gearshift.
18